Search the Community
Showing results for tags 'orphanage'.
Found 1 result
Brief Intro: I am Phani Krishna, living and working in UK. During my vacation to India, I am setting up a small scale iAVS system at an orphanage in hyderabad, to establish their own food supply system. I have made some progress with the project and now I feel I need some help from the community to take my ideas forward. The project is being established at the kitchen backyard of the shelter home. The area was all dirty and infested with wild rats earlier and hence I took the decision to pour a concrete slab at the ground level to be sure about the environment for the system. The tank size is approximately 25000 litres with a depth of 2 metres. Size of Tank: 1.5 x 3 x 6m (slope of 1ft towards North East) Proposed fish tank usage volume: 14 cu.m. (can be reduced to suit the growing area) Size of 1 grow media bed: 1.3m x 3m x 0.42m (area 3.9sq.m.), central drain of about 30mm dia Total Grow Beds : 11 (can be extended on requirement) Total Growing Volume: 17.16 cu.m The concrete ground is sloping from south east to north east with a 1foot slope approximately. Pump Details: Inlet Size: 32mm Outlet Size 25mm Head : 17 to 27m Discharge : 180 LPM Since this is my first aquaponics/iAVS project, I am planning to use the tank only partially untill the shelter home staff get accustomed to the system and its use, while I also learn and fine tune the variables. In the attached pictures of the area, one can see the brick lines of proposed biofilter beds for growing plants. We have set it up as a bed size of 1.3x3m with 0.3 to 0.4m wall/walkway between the beds. To pump water from the tank, we have selected a 1hp openwell submersible pump. I have not yet got the sand delivered and hence could not do conductivity test and pH test for the system. Meanwhile, I am planning to install the pump and plumbing for the system. I am not sure of the pump selection and plumbing arrangement. I am of the opinion that water supply for all the beds will be piped to the pump, but in this case, the flow will be different in the first bed when compared to the last bed due to the distance the water has to travel from the pump. How to manage to get constant or similar flow rate on all bed supply points ? Is the pump selection approximately matching the system ? Is it better to increase the biofilter area to match 1:2 ratio of tank to grow media ? I have not yet decided on the quantity and type of fish but to begin with, I am planning to introduce ornamental fish like Gold fish (because the institution follows Gandhian philosophy of vegetarian diet). The organization for which I am setting up this system is a NGO established by Mahatma Gandhi. They provide shelter for victims of rape, social abuse, trafficking etc. I feel privileged to have the opportunity to contribute to such a cause in my own little way. Any help from this forum to help me complete the project is greatly appreciated !